Ju56700

cover

IMG_20250928_180438.jpg

IMG_20250928_180022.jpg

IMG_20250928_174621 - Copie.jpg

IMG_20250928_174657.jpg

plate_1.png

2025-09-28_193387cbd5884.jpg

<ul><li>Hauteur de couche : 0,16 mm</li><li>Supports nécessaires uniquement pour la partie à 90°</li><li>4 parois pour renforcer la zone autour des vis</li><li>Taux de remplissage : 50 %</li></ul>&nbsp;

<ul><li>Layer height: 0.16 mm</li><li>Supports needed only for the 90° part</li><li>4 walls to reinforce the area around the screws</li><li>Infill density: 50%</li></ul>&nbsp;

0.16mm layer, 4 walls, 50% infill

🎸 Envie de donner un coup de rock’n’roll à vos murs ? J’ai créé ces supports pour mon fils fraîchement équipé d’une guitare électrique (fan absolu d’AC/DC… Attention Angus, la relève débarque ! ⚡).Ces supports sont pensés pour une Pyle Heavy Metal : sur ce modèle, le point d’attache de la sangle avant est… au dos de la guitare (oui, ils aiment compliquer la vie 😅). Mais pas de panique : vous pouvez aussi imprimer deux supports à 90° pour les adapter à d’autres modèles !👉 Si le design vous plaît, je peux aussi décliner plusieurs versions avec différents angles d’attache, histoire que vos guitares soient bien calées… et prêtes à envoyer du riff !&nbsp;Quelques conseils avant impression :<ul style="list-style-type: disc"><li>J’ai remarqué que ma guitare était plus lourde du côté du manche que du corps. Comme cela peut varier selon les modèles, j’ai inclus deux versions dans le fichier.</li><li>J’ai imprimé la pièce en PETG pour plus de solidité, mais une impression en PLA avec des couches fines devrait aussi être suffisamment robuste.</li><li>Paramètres utilisés :<ul style="list-style-type: circle"><li>Hauteur de couche : 0,16 mm</li><li>Supports nécessaires uniquement pour la partie à 90°</li><li>4 parois pour renforcer la zone autour des vis</li><li>Taux de remplissage : 50 %</li></ul></li></ul>➡️ Bon print ! 🎸&nbsp;&nbsp;🎸 Want to give your walls a rock’n’roll upgrade? I designed these mounts for my son, who just got his first electric guitar (a huge AC/DC fan… Watch out Angus, the next generation is coming! ⚡).These mounts are made for a Pyle Heavy Metal guitar: on this model, the front strap button is actually… on the back (yeah, they like to keep us on our toes 😅). But no worries: you can also print two 90° mounts to fit other guitar models!👉 If you like the design, I can also make different versions with various mounting angles, so your guitars will be safe, sound… and ready to rock! Some tips before printing:<ul style="list-style-type: disc"><li>I noticed that my guitar is heavier on the neck side than on the body side. Since this may vary between guitars, I included two versions in the model.</li><li>I printed it in PETG for extra strength, but with fine layers it should also be solid enough in PLA.</li><li>Print settings used:<ul style="list-style-type: circle"><li>Layer height: 0.16 mm</li><li>Supports required only for the 90° bracket</li><li>4 perimeters to reinforce the screw areas</li><li>Infill: 50 %</li></ul></li></ul>➡️ Happy printing! 🎸&nbsp;

🎸 Want to give your walls a rock’n’roll upgrade? I designed these mounts for my son, who just got his first electric guitar (a huge AC/DC fan… Watch out Angus, the next generation is coming! ⚡).These mounts are made for a Pyle Heavy Metal: on this model, the front strap button is actually… on the back (yeah, they like to keep us on our toes 😅). But no worries: you can also print two 90° mounts to fit other guitar models!👉 If you like the design, I can also make different versions with various mounting angles, so your guitars will be safe, sound… and ready to rock!&nbsp;Some tips before printing:<ul style="list-style-type: disc"><li>I noticed that my guitar is heavier on the neck side than on the body side. Since this may vary between guitars, I included two versions in the model.</li><li>I printed it in PETG for extra strength, but with fine layers it should also be solid enough in PLA.</li><li>Print settings used:<ul style="list-style-type: circle"><li>Layer height: 0.16 mm</li><li>Supports required only for the 90° bracket</li><li>4 perimeters to reinforce the screw areas</li><li>Infill: 50 %</li></ul></li></ul>➡️ Happy printing! 🎸&nbsp;&nbsp;🎸 Want to give your walls a rock’n’roll upgrade? I designed these mounts for my son, who just got his first electric guitar (a huge AC/DC fan… Watch out Angus, the next generation is coming! ⚡).These mounts are made for a Pyle Heavy Metal guitar: on this model, the front strap button is actually… on the back (yeah, they like to keep us on our toes 😅). But no worries: you can also print two 90° mounts to fit other guitar models!👉 If you like the design, I can also make different versions with various mounting angles, so your guitars will be safe, sound… and ready to rock! Some tips before printing:<ul style="list-style-type: disc"><li>I noticed that my guitar is heavier on the neck side than on the body side. Since this may vary between guitars, I included two versions in the model.</li><li>I printed it in PETG for extra strength, but with fine layers it should also be solid enough in PLA.</li><li>Print settings used:<ul style="list-style-type: circle"><li>Layer height: 0.16 mm</li><li>Supports required only for the 90° bracket</li><li>4 perimeters to reinforce the screw areas</li><li>Infill: 50 %</li></ul></li></ul>➡️ Happy printing! 🎸

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

ACDC Electric Guitar Stand

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models