This is my own work, originally posted on Printables.
This model was originally created for the Voronoi patterns contest on Printables. This snap-fit model features posable ball-jointed wings and an elegant display stand.
Print files are divided into Body, Wings, and Stand. Just print one of each file. If you’ve printed any of my other jointed figures, you should be familiar with the recommended settings.
Material | PLA*, PETG, ABS, or ASA |
Layer height | 0.15mm (first layer 0.2mm) |
Infill | 10-20% rectilinear |
Supports | None |
*PLA is not recommended for the Body, because the sockets of the wing joints can break during assembly or become loose over time. However, it will work if it's all you have.
If you have issues with bed adhesion, try lowering your first layer speed and/or adding a brim.
As always, assembly requires no glue or screws, just patience. :)
This design is now under a CC BY 4.0 license. This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:
Voronoi Dragonfly © 2024 by Lucky 13 Toys is licensed under CC BY 4.0 |
Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.
Want to support future projects with a one-time donation? Make a PayPal donation here!