Elegant Peacock Statue

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. 

I’d like to present to you elegant peacock statue. As sometimes happens with my designs, this is not a model for beginners or the impatient. The printing itself is straightforward, but removing the supports requires some patience and sharp tools.
That said, it has been thoroughly tested, and the results are beautiful.

Difficulty level: [7/10]

[ Suggested Print Setup for 20 cm figurine ]
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 5%
Wall loops: 3-4
Supports: Tree (auto)
Threshold Angle: 40
Printed with: 
- PLA Matte White

Printed with fuzzy skin effect:
Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.2
Fuzzy Skin thickness: 0.2

These photos are real and show an actual 3D-printed figure photographed by me.
 
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.