Scruffy Teddy 2
Print Profile(1)
Description
BuNtSt@ PrInTs
Scruffy teddy 2
3 colours
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 120x152.4mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 1.84mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#658697 PLA Overture Gray Blue Transmission Distance: 6.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray Blue
At layer #15 (1.28mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)