Unifi G4&G6 Instant mounts set-Wall,Table,Ceiling

These are a set of mounts for the Unifi G4 and G6 Instant cameras. The tilt and swivel capabilities are limited on these cameras with the included mount and makes it impossible to place the camera on a flat surface looking down or up. On a cabinet or table for instance. 

Ceiling mount in a separate profile

These mounts makes every mount or placement super easy. This profile includes a spare normal wall mount, a 45 degree wall mount, a Table mount stand and a 45 degree Table mount stand. This is the complete set in this print profile. But separate stands are available in the other print profiles. The table stand are sturdy enough to handle the weight of the camera. But there are also holes in the bottom if you want to use screws to secure them. 

• The regular table stand is great if you want to place your camera on a dresser or similar. 

• The 45 degree table stand is necessary if you want to place the camera on top of your kitchen cabinets. Otherwise you wont be able to tilt the camera enough.  

• Same with the 45 degree wall mount. Perfect if you want to place the camera high and look down. 

• Now there is also a 45 degree ceiling mount to get perfect views. You find that in a separate print profile. 

Enjoy. These are very lightweight and fast prints. NO AMS needed. 

These print fine in PLA, but for outside use or a stiffer material I recommend PETG HF, ABS or ASA. 

If you like my models, please consider following me as I release new models on a regular basis. Thank you in advance. 

And if you could leave a comment, a rating, and even upload a picture of your creation, so please do that if you have time. Thank You

Don't forget to check out my other models. https://makerworld.com/sv/@Mikael_Swe/upload

If there are any prints not suitable for your printer model. Just let me know and I will try to fix that.