This filament sample holder is intended to be used with the samples created by Extrutim and can be found here.

Version 1 of the model can be found here.

I have made the sample holder to be able to stick to the AMS of Bambulab, so I can see which filaments are in there in which position.
On the filament samples I print the hotend and bed settings as well, so I know what to use as recommended settings.

My workflow is to always create a filament sample for each new filament and keep it in the box that I printed by Extrutim. When switching filaments, I also replace the sample in the holder.

v2 Changes

The addition in version 2 is to have a small lip at the top of the model, so the samples don't fall out when opening the AMS.

What you additionally need:

• double sided tape

I used the following settings to print in 1.75 PETG with 0.4 nozzle:

Leave a like, make or remix as you like!