Articulated Gyarados, Multipart
Print Profile(3)
Description
This is a multi-part articulated model of Gyarados, designed for smooth printing, strong detail, and reliable articulation—all without AMS. Each body segment is separated for easier printing and clean assembly, while maintaining the powerful, flowing form of the legendary sea serpent.
During assembly, make sure to fix the tail at the end to achieve the best alignment and articulation.
Note: Attach the smallest Beige bottom after hooking the tail.
Install the Eyes
- Refer to Figure 1 for correct positioning.
Install the Lower Half (Beige Section)
- After fixing the tail hook, proceed with the lower beige section.
- Important: Do not mix up the pieces. Install them in the same sequence as provided.
Install the Tail Hook
- The tail hook must be installed first before attaching the lower half.
- Make sure it is firmly fixed in place.
Install the Ears
- Align each ear to its designated slot on the head.
- Apply gentle pressure until they fit securely.
- If the fit is tight, lightly heat the joint area with a heat gun or lighter (carefully) to ease insertion.
⚙️ Recommended Print Tips
| Setting / Note | Recommendation |
|---|---|
| Type | Multi-part, articulated (no AMS required) |
| Supports | Default supports where necessary |
| Assembly | Attach the tail last for proper alignment |
| Finishing | Beige on the lower belly after tail is fixed |
| Tolerance Fix | If joints are tight, carefully use a heat gun or lighter |
| Scaling | Recommended at medium-to-large sizes for smooth articulation |
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (93)