Nespresso pod/capsule holder/stand - Free 3D Print Model

Search models, users, collections, and posts

velkejdomi

Household>Other House Models

IP Report

Print Profile(1)

All

A1 mini

P1S

X1 Carbon

H2D Pro

H2S

X1E

H2D

P1P

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

5.8 h

2 plates

4.7(16)

Open in Bambu Studio

Boost

268

293

170

Released

Description

Hello,

This model is a must have for the Nespresso coffee machine users. Minimalistic holder for Nespresso pods (capsules) of any type - universal design.

7 to 8 pods can be stored in single-slot design / 28 to 32 pods in total in the the quad-slot design
Dimensions: W x L x H = 131.5 x 81.5 x 175 mm, wall thickness 1.5 mm for higher stiffness
Singlepart model – no assemly needed
Size designed especially for Bambu Lab A1 Mini
Feel free to print in any material, speed or quality
The real model on the photos is printed with Bambu PLA Matte black, Nozzle 0.4 mm, 0.24 mm Draft (142 g, 3:23 hod)
For the model with Nespresso logo – please approach me directly

If you like my work, I'll never turn down a coffee! Thank you!

https://buymeacoffee.com/velkejdomi

Comment & Rating (20)

@Trxer0620

This was way smaller then it looks

The designer has replied

@velkejdomi

Hi, I am sorry to hear that. Unfortunately it was designed for the standard Nespresso pods only, but not for the Vertuo pods.

@user_3943580285

Print Profile

0.2mm layer, 2 walls, 15% infill

nice, made in red PETG!

Show original

@user_1824437069

slots are too small for pods. waste of filament.

The designer has replied

@velkejdomi

Sorry to say, but if you have an issue, then you are whether not using the standard Nespresso pods or printed the model incorrectly. As you can see on the picture, the standard Nespresso pods fit without any issues – and there is even a 1-2 mm tolerance designed.

(Edited)

@JTimmermans

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice and simple print.

@Bries129

Print Profile

0.2mm layer, 2 walls, 15% infill

top my wife is delighted

Show original

@user_2926105170

Print Profile

0.2mm layer, 2 walls, 15% infill

Just what I needed. Simple, small, and holds 32 pods.

@user_1962350094

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3270467868

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_4283250994

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3339680148

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.