Fun Bee Wall Welcome Sign -Layered -AMS Optional-

Use Code   MAKER10  for 10% OFF

Just a fun piece of wall art to hang on your wall or door.  Very clean and simple design that prints great!    

There is an Eye hook located on the back for easy hanging.

If you print without changing anything, the model is APX 9 ½" wide x 8 ½" tall (240mmx210mm)

Feel free to scale up or down.  Please note:  If you scale SMALLER, make sure you don't make the Z height any thinner than it is as it will effect the eye hook on the back. 

Using an AMS is OPTIONAL!

   If you have an AMS, its all set to go as-is.   

   If you only have a single color 3D printer, just set up the print to pause/change filament on the following layers:

• Start off with your base color. (This is the TAN/BEIGE layer in my photos) 
• pause at layer 26 in your slicer to change your filament to the 2nd layer color (This is BROWN in my photos)
• pause at layer 36 in your slicer to change your filament to the 3rd layer color (This is ORANGE in my photos)
• pause at layer 46 in your slicer to change your filament to the 4th layer color (This is YELLOW in my photos)
• pause at layer 56 in your slicer to change your filament to the 5th layer color (This is WHITE in my photos)
• pause at layer 66 in your slicer to change your filament to the 6th layer color (This is BLACK in my photos)

A note from the designer:

I print out copies of every model I post to make sure everything is working as it should.  If you have any problems, please don't hesitate to reach out.  If I can help, I will.

If you have a suggestion of a model for me to post, just ask.  I may be able to help.

Please make sure to follow me.  I've got some great models lined up for 2026!!

Also, I love when you all share photos of my models that you print :)

All work done in Autodesk Fusion and Tinkercad.

Use Code   MAKER10  for 10% OFF