Picture Frame for Clover
Print Profile(1)
Bill of Materials
- Plexiglas 2mm x 1: Größe 5,5 x 4,5 cm
Description
A beautiful clover-shaped frame for your 4-leaf or multi-leaf clovers
Have you also wondered how best to display those rare, lucky, but quite fragile clovers? Here is the solution. Elegant, stylish, and printed in under 2 hours.
In addition to the printed frame and stand, you only need a 2mm thick piece of plexiglass measuring 5.5 x 4.5 cm.
To assemble, first place the plexiglass into the frame, followed by the previously dried clover. Then, first guide the locking bar through the hole on the stand and then clamp the stand at the top, between the plexiglass and the frame (it is deliberately quite tight so that the clover does not slip). Finally, press the stand into the frame at the bottom as well and slide the locking bar into the recess on both sides to lock everything.
Here in the profile, I printed it in 2 colors, but it also looks simply great in a single color.
and now: happy printing ;-)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)