Love Birds LED Tealight Lantern - Free 3D Print Model

Search models, users, collections, and posts

Kann_Nix_PrintDesign

Household>Decor

IP Report

Print Profile(1)

All

P1S

X1E

P1P

A1 mini

X1 Carbon

H2D

H2S

H2D Pro

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

5 h

2 plates

5.0(17)

Open in Bambu Studio

Boost

192

585

210

142

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

D37.2x36.6mm LED Flame Tea Light Candle Set

D37.2x36.6mm LED Flame Tea Light Candle Set

D37.2x36.6mm LED Flame Tea Light Candle Set

Bambu Filaments

Select all

Matte Ivory White (11100) / Refill / 1kg

PLA Matte

Description

Content has been automatically translated.

Show original

We projected our loving birds onto a lantern

The lantern creates a cozy warm light

LED tealight max 40 mm diameter

Printed on P1S material Bambu PLA Matte Ivory White, Kexcelled PLA Matte Sage Green Milky Green

Size :

approx. 11 cm diameter approx. 15.5 cm high

If you like our design, please leave a like

If you like our work, please support us with a Boost

Many thanks for your support

Boost Me (for free)

If you like my work, please support me with a Boost. Many thanks to all of you

Please don't forget to rate the print profiles. Thank you very much

Here is my Instagram Account

https://www.instagram.com/kann_nix_printdesign?igsh=djdrN2p3NXUxbW9t&utm_source=qr

Check back regularly, I will regularly post previews of new prints there

Thank you very much for your support

and have fun printing

Comment & Rating (29)

@LayerAndLeaf

Print Profile

0.2mm layer, 3 walls, 15% infill

Gorgeous as always! Easy and beautiful print 🥰

The profile uploader has replied

@Kann_Nix

🥰Thank you very much🥰

Show original

@user_143866180

Apart from a few spots where it's unclean, a really great print. Will print it again in a few days, just in case it was the printer. I think it's really beautiful. And also great that the filaments used were named because of their color. Thank you very much

The designer has replied

Show original

@Kann_Nix

Hello. These are slight transitions. sometimes unavoidable. Try to remove the filament with a toothbrush. the contours (branches) are very narrow in some places. You could also print it with a 0.12mm layer height, but that takes quite a long time. but that doesn't matter for the final result when it's illuminated from the inside

Show original

@user_2433257743

super nice! printed it as a gift

Show original

@user_3833912042

Boosted

Delighted with this - really pretty - came out perfectly first time and lovely for valentine's day! I love that you can change the colour of the base to suit.

@user_3808172812

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Very nice design and great print result, whether with or without a base. I almost like it even better without it, as otherwise a part of the beautiful design is lost Thank you very much for sharing! It would certainly also look good at different times with other designs (Christmas, Easter, birthday etc.)

The profile uploader has replied

Show original

@Kann_Nix

Many thanks for the boost We are already working on other designs 😍 Christmas isn't far off anymore 😉

Show original

@SoapStudio

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Round base that prints round, finally the world is perfect

The profile uploader has replied

Show original

@Kann_Nix

Thank you very much ❤️

Show original

@user_627421402

Print Profile

0.2mm layer, 3 walls, 15% infill

parfait

(Edited)

The profile uploader has replied

@Kann_Nix

Thank you very much 🙏

Show original

@bajadriver

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice tealight holder, very good fit

The profile uploader has replied

Show original

@Kann_Nix

Thank you very much for the support 🙏🥰

Show original

@SoapStudio

Boosted

Finally a round base that prints round too Very nice, only the engraving of the branches and birds did not turn out quite perfectly in the upper area for me, which was probably due to the filament More perfect objects like this please

Show original

@user_3769578296

Print Profile

0.2mm layer, 3 walls, 15% infill

sehr schön 🥰

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.