HMGen7 for Geeetech 3D Touch V3.2 Pro ABL sensor
Print Profile(0)
Description
Some mounts for the Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor on the HeroMe Gen7 printhead assembly.
Derived from the existing ABL mount for the BLtouch.
The Geeetech "Pro" has a wider distance between the mounting holes, so I had to modifiy the mounts.
Geeetech 3D Touch V3.2 Pro Auto Leveling Sensor
- https://www.geeetech.com/geeetech-3d-touch-v32-pro-auto-leveling-sensor-p-1222.html
- https://www.amazon.de/DERUC-Zubeh%C3%B6r-Automatische-Nivellierungssensor-3D-Drucker/dp/B08SBPNK3Z (much cheaper...)
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.14 - 0.28
Infill:
45
Filament Material:
ABS
Notes:
I printed this in ABS (Geeetech ABS+) like all my HeroMe parts.
For all HeroMe parts, I use
- outer layer height: 0.14mm
- inner layer height (inner perimeters and infill). 0.28mm
- line width 0.6mm
- 45% infill (not really needed here though)
- adaptive cubic infill
- automatic tree support with lean trees, on buildplate only, "only critical" NOT checked
and two postprocessing scripts in OrcaSlicer 2.3.0
- https://github.com/TengerTechnologies/Smoothificator
https://github.com/TengerTechnologies/Bricklayers
in this version
https://github.com/TengerTechnologies/Bricklayers/blob/main/NonPlanarInterlockingWalls.py
settings see file "settings.zip"The .3MF is for OrcaSlicer 2.3.0, the _generic.3mf is exported from OrcaSlicer als "Generic 3MF",
whatever that means.STLs are exported from OrcaSlicer. Go for the 3MF if possible.
How I Designed This
Just a few modifications in OrcaSlicer ("add part" / "add negative part").
Category: 3D Printer PartsDocumentation (1)
This remix is based on
License
Comment & Rating (0)