1/6 Luxury Chair Throne for BJD Doll - Free 3D Print Model

Search models, users, collections, and posts

wowcool

Art>Other Art Models

IP Report

Print Profile(1)

All

P1S

H2S

H2D

X1 Carbon

X1E

H2D Pro

P1P

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

13.7 h

3 plates

4.9(8)

Open in Bambu Studio

Boost

263

665

225

Released

Description

This is a luxury/royal throne chair for doll/BJD, best print with shiny/silk filament. It stands about 28cm tall, should work with all 1/6 or even some ¼ scale dolls.

There were some issue when I do my first print and I fixed it before uploading, but I have not do a second test print.

It 's very unlikely but it is possible there are still minor problem, especially on the “pins” of the back cushion. If you are unable to fit the back cushion into the chair pin, you may need to break off the pins on the chair and poke them into the back cushion. Other parts are fairly simple and require glue to held together.

It is separately into a few parts that needs to be print in 3 plates.

Comment & Rating (11)

@dirtybit2495

Print Profile

0.2mm layer, 3 walls, 10% infill

came out very good, will have to reprint and scale it a little bigger for the 1/4 doll of a friend but still quite usable.

@AlienZen

this turned out great. For the BJD community, my wife says it works well with her YD scale dolls.

@Taiwanmama

Print Profile

0.2mm layer, 3 walls, 10% infill

My youngest gave it to his teacher as a Christmas present/ elf’s action accessory. Entired classmates loved it so much and had lots of fun. 🤩

@user_1240930236

Print Profile

0.2mm layer, 3 walls, 10% infill

Printed for dolls, beautiful

Show original

@user_143000029

Could you please make it on different plates so it could be made without AMS?

The designer has replied

@hamburger0050

Hi it is already separated into 3 plates and no AMS is needed.

@user_3625655659

Print Profile

0.2mm layer, 3 walls, 10% infill

@ReiRina

Print Profile

0.2mm layer, 3 walls, 10% infill

@Hairee

Print Profile

0.2mm layer, 3 walls, 10% infill

@Rudboy972

Print Profile

0.2mm layer, 3 walls, 10% infill

@user_1583697059

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.