SmoothRoll Cling Film Dispenser – No Jam, No Mess
Print Profile(1)
Bill of Materials
Description
SmoothRoll Cling Film Dispenser is a fully 3d-printed dispenser for ClingWrap
You will need a cutter from the one of the cardboard-boxes you get at the convenience store.
Alternately you can buy them for basically nothing: https://share.temu.com/2FqqMbndmhB
Boost Me (for free)
If you like the model please give me a boost :)
I also appreciate constructive criticism
Features:
Fully 3d-printed axial roller bearings at each end for smooth dispensing
Made for 30cm rolls
Adjustable width
Snap-fit box for quick assembly
End lids can either be glued or bolted using M3x16mm screws
Rolls can be up to 55mm in diameter
Printing
I printed the part in PLA and it worked fine, however PETG would probably be more suitable
All the parts are on the same plate so it can be made in a single print.
I personally prefer the box in black and bearings in white.
Assembly instructions:
Assemble 12 rollers in alternate direction in the bearing base and press the bearing cone in place.
Press the two halves of the box section firmly together
Insert the bearing assembly into the box and screw in the knurled handle for each side
Either glue or screw on the end lids with M3x16mm screws.
Assemble a 330mm cutter, available from convenience store or temu
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)