LianLi O11 Vision Compact PSU extension bracket

PSU extension bracket for lianli o11 vision compact to fit in a pass through cpu waterblock.

You'll need:

-2x ~115mm M2 rods 

-4x M2 washer

-4x M2 nuts

You can use the rear psu cage of the case mount your psu on it, then mount it on the bracket. 

Push the threaded rods through the holes in the bracket. You can use the existing holes on the case to screw the rods. Now lock each side of both rods with washers and nuts. Use the default screws for the 2 side fastening holes as seen in the picture. 

Only using the pre threaded holes of the case wasn't really stable for me. With nuts on both sides I am able to lift the case holding onto the bracket.

For more pictures & an example