Baseball Flip and Slide Fidget Toy (41 min)

Thank you for your support! If you like our family's designs - you can sell the physical prints through a paid Patreon membership: 

https://www.patreon.com/c/SpacedOutStudio

Let this fully cool after print (you can remove from the build plate) and rotate the hinges – NOT the pin – and then press the pin between your fingers to break the supports (don’t twist the pin – see image below). If you have filament and settings dialed in you can also gently twist the pin until you feel a little resistance, then twist the other way gently until it fully loosens. The hinges should move just fine. The more you play with it, the more it will loosen. PLA will work great. Some filaments will allow movement right after the print.  If you have issues, please contact me and happy to help. 

⚾ Step up to the plate with the Baseball Flip & Slide Fidget—the only ball you’ll never strike out with. It flips, slides, twists, spins, and slips smoother than a fastball down the middle. No glove required, and no chance of losing it in the outfield. 

Perfect for killing time in the dugout, practicing your “big league” finger dexterity, or just pretending you finally made it to the majors.  

🕒 41-min print + 12g of filament
⚾ Always in season—rain delays not included

Get ready to fidget like it’s the bottom of the 9th!