Macinas NAS Case | 11-Bay Macintosh-Inspired

组装视频：

Detailed Assembly Guide & Reference Builds：https://mukicheung.feishu.cn/wiki/MUazwpWkTiZ2G5kYD3Ycdm4un6g

❤️ Quick Note

Thank you so much for taking the time to print this project!

This NAS case holds up to 6× 3.5" HDDs, 4× 2.5" SSDs, and 1× M.2 SSD.
It supports a standard ITX motherboard, small 1U FLEX PSU, and a 47 mm top-down cooler.

The upper drive section is cooled by two 9225 fans with a direct airflow path, keeping temperatures well under control.

The exterior design is inspired by the Macintosh SE, scaled to 86% to eliminate unnecessary internal space.

I recommend printing the drive cages and trays in PETG or ABS – they may not look pretty, but they’re hidden inside anyway :)
For the rest, I suggest using Bambu PLA Matte for a clean finish.

The print in the photos uses Matte Desert Yellow (11401) and Bone White (11103).

I've uploaded my sliced model and plate layout above.
But this is my first time publishing on MakerWorld, so there may be some details I missed.

Please double-check the model in Bambu Studio before printing to avoid wasting materials – thank you for understanding!

If this helps you out, feel free to give it a like – I’ll keep creating more projects ❤️