Mushroom Magnets

For commercial rights to my models and exclusives, check out my Patreon or message me for other options.

https://www.patreon.com/vogel3dcrafts

There aren't too many instructions for these models. I used supports for the magnet holes on the multicolor prints because the overhangs were weird for some of them. Single color might not have that issue, but you can decide if you'd like to use support or not. The 3MF file has all my settings and is already painted. You can swap to whatever colors you would like to use. There could be some issues if trying to re-paint just because of the way the models came out, so I do recommend just swapping colors on your AMS. I've also included a zip file with the regular STL files. I think these would be great models to hand paint, especially if you like painting minis.

I use 6x3mm round magnets and if you decide to size the magnets up, there would be a gap around the magnets or you would need to purchase a different size depending on how big you sized up, so please keep that in mind. I wouldn't recommend sizing down because you would need an even smaller magnet, and a lot of the details would be lost. I think they're a pretty good size as is, though. I use E600 glue to secure the magnets, and it hasn't failed me yet.

My set were printed at a .12 layer height, but .16 would be alright to save some time and waste. I just wanted to get the details on the smoother side. I do highly recommend using purge objects and/or printing multiples on a single plate with the same colors to reduce waste. Because there print flat there are color changes on almost every layer.

If you have any issues with any of the magnets please let me know so I can make any needed adjustments to the models. My tests came out well, so hopefully everything is good to go and I didn't miss any issues.

Filaments used:
Bambu basic black
Bambu matte jade white
Bambu matte scarlett red
Bambu matte desert tan
Bambu matte latte brown
Bambu matte dark brown
TTYT3D silk green