Charging station_Phone_Buds 3 pro_Galaxy watch

Search models, users, collections, and posts

tim58

Hobby & DIY>Electronics

IP Report

Print Profile(2)

All

P1S

X1 Carbon

H2D

P1P

H2S

X1E

H2D Pro

H2C

P2S

A1 mini

X2D

A2L

0.08mm layer, 2 walls, Lightning infill pattern

Designer

6.8 h

1 plate

4.4(32)

Watch 6 Adapter (29,3mm), 0.16mm layer, 2 walls, 15% infill

14 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

371

1108

934

453

Released

Description

Content has been automatically translated.

Show original

This model was designed to conveniently charge both your Samsung Galaxy Watch and your smartphone

A separate holder is integrated for the Samsung Galaxy Buds 3 Pro

The watch is charged with the original standard charger, and the normal charging cable is also used for the smartphone (No inductive charging!)

In addition, practical cable management is provided for both the phone and watch charging cables so that everything stays neatly stowed away

Comment & Rating (74)

@TroyLom1

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

had to make an adapter to fit galaxy watch 6 charger but prints decent

(Edited)

The profile uploader has replied

@PhotoTImoGraph

Thank you very much , also for the print profile. I appreciate you.

@user_2136612677

My samsung galaxy 5 watch has a wireless chager of 29.3mm diameter. Maybe you can change it to fit me? and maybe you can change earbuds slot to 55x27mm ? Thanks a lot :)

The designer has replied

@PhotoTImoGraph

I'll try to find some time in the next few days so I can make these small changes.

@PhotoTImoGraph

I've made the changes and could send you the file. I tried contacting you via private chat, but you haven't replied to my message. It would be great if you could reply there so I can send you the file.

@user_2136612677

Replying to @PhotoTImoGraph :

Hi i replied in private messages :) thanks

@AnkaNox

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

it didn't quite work out for me in the end, but it turned out nice

Show original

@thiago_dg

I had the same issue. The watch charger didn't fit, even with the adapter. Its the original Series 6 one.

@Bigtymedee

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

Everything came out perfectly. Much thanks to the creator, job well done.

The profile uploader has replied

@PhotoTImoGraph

Thank you very much, I appreciate you

@Moneymaker87

Hi this part is actually pretty cool However since I'm still new to this I don't know what I did wrong here I just downloaded the file and printed it This is what happened What to do

The designer has replied

Show original

@PhotoTImoGraph

There are several reasons why this could be 1. You used low-quality material (not original) 2. You turned off the support structure, which prevents the overhang from being printed correctly 3. You set an incorrect nozzle size when slicing the object 4. You set the layer height too high (hence the visible lines) I hope I was able to help you

Show original

@oleg_grushin

Boosted

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

perfect for my watch 7 (with adapter) and s24u, thanks!

@user_351898549

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

The hole for the watch charger is way too big

Show original

@Navos

Yes, serious, not great

Show original

@NMGNino

this is because the print profile uses the old diameter the new watch chargers are smaller than the old ones

Show original

@oleg_grushin

Boosted

interesting, will the galaxy s24 ultra hold up there. the back wall for the phone doesn't look very tall

(Edited)

The designer has replied

@PhotoTImoGraph

I think that should work, I have an S24+ myself and I have no problems.

@oleg_grushin

Boosted

Replying to @PhotoTImoGraph :

thanks for answer, is this for galaxy watch 7?

@PhotoTImoGraph

Replying to @oleg_grushin :

I think if you have a Galaxy Watch 7 you also need to use the pressure profile and adapter from @TroyLom1 for it to fit.

@peanomachine

Nice and practical, well done! Question: wouldn't it have been a good idea to also add a charging tip for the buds

The designer has replied

Show original

@PhotoTImoGraph

Yes I had also thought of that, but the stand would have needed to be 7 cm taller for the cable to fit Because then the earbuds would have been almost level with the clock, I decided against the charging feature

Show original

@peanomachine

Replying to @PhotoTImoGraph :

Indeed, I hadn't thought of that

Show original

@VitorTerto

Print Profile

0.08mm layer, 2 walls, Lightning infill pattern

I really liked the model and use it every day, it turned out very cool The only problem I had was that the print quality on the clock part wasn't as good (the bottom part, not visible) I thought it was some problem related to filament moisture, but I saw in the comments that other people had the same problem in that spot Anyway, I liked it a lot and it was worth printing

The profile uploader has replied

Show original

@PhotoTImoGraph

Thank you very much for your honest review.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.