Search models, users, collections, and posts
Locksport Practice Holder for KIK locks knurled
IP Report
Print Profile(1)
0.16mm layer, 3 walls, 15% infill 2C
Designer
9.3 h
3 plates
Open in Bambu Studio
Boost
6
19
1
1
18
14
Released
Description
Knurled holder to get a comfortable grip on a KIK cylinder for locksport practice.
Diameter is ~50mm at the center of the holder.
Uses only 27g of filament per holder. Plates with both and individually are in the print profile, print time is ~4.5 hours for both sizes.
There are two depths as I have found that these KIK lock cylinders don't have a universal depth. Included are 29mm and 32mm depth. This is printed on the bottom with a contrasting colour.
You can take a look at my other models here.
Boost Me (for free)
If you like the model.. Please support me by boosting if you have one to spare, and following me on MakerWorld
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)