Zootopia Nick Wilde Articulated Figure

The movie Zootopia 2 is about to be released, let's warm up in advance Nick Wilde, fully Articulated, including movable eyes It has a flocked surface, includes four interchangeable hand types, and a default smiling face Another interchangeable face is provided, also with movable eyes, link: https://makerworld.com/en/models/1827016

Each part is named, visible in the slicing software, and can be assembled by following the instructions

Some parts are relatively small, please be careful when assembling To ensure tight joints, some areas may require some force to attach, please pay attention to the direction of force to avoid breaking parts Also, be careful when moving the joints, as this is not an industrial mass-produced item and its strength is limited (even mature products from Bandai and Kaiyodo can have broken axles, joints, or loose joints)

I used Bambu Lab's PLA Basic filament for printing and adjusting the joint tightness Please avoid using filaments with poor interlayer adhesion like PLA Matte or PLA Silk on stressed parts, as they may break

Due to differences in 3D Printer and filament, the joint tightness of your prints may vary Simple filing or applying a thin layer of super glue to increase thickness should adjust it well

A couple more words:

Making Articulated figures requires both realistic appearance and playability, as well as color separation and part breakdown for easy printing and assembly, making the design much more complex than a static display With various adjustments to the model and printing settings, some minor issues are inevitable Creating is not easy, please be understanding if you encounter problems, just leave a comment, do not casually give a bad review

Multi-color printing requires Bambu Lab AMS, which means a lot of poop Some users gave 1-star reviews to previously released models because of the excessive poop from multi-color printing, which I find quite helpless Friends who mind the excessive poop might consider waiting for new multi-nozzle 3D Printers Alternatively, you can print in a single color and then paint it, I tried printing everything in gray and coloring with acrylic markers, for your reference:

 

I've also made other things, feel free to check out my homepage if you're interested:

P1S Lead Screw Protection Cover