Camera waist-level viewfinder hot shoe version for under 20 yuan (small size) (easy to install/remove) (only 11g)
Print Profile(1)
Description
Boost Me (for free)
If you find it useful, please support me!
Tutorial on making a camera waist-level viewfinder for under 20 yuan
Materials to purchase are as follows:
3CM*3CM reflector, the designed reflector slot is 1.5mm, purchase a reflector no thicker than 1.5mm
3CM*3CM Fresnel lens, with a focal length of 28mm
28mm focal length convex lens. I found a seller on Taobao; the marked diameter is 18mm, but the actual measurement after receiving was 17.6mm, so the aperture is designed according to 17.6mm
Installation:
1. The reflector can be pushed directly into the groove. If it feels loose, you can add a drop of 502.
2. The convex lens should be pressed in firmly, from the direction shown in the diagram. Then, press it into the main body together.
3. Fresnel lens installation, note that the threaded side should face up, and the smooth side should face down.
4. Install the top cover. The top cover is designed with a raised edge that aligns with the main body; just press it down.
If any part isn't tight enough, please use super glue directly!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)