Transformer Optimus prime

We apologize. There will be no further updates or feedback.

This is Optimus Prime from Transformers.
Initially, I modeled it at a size of 35 cm, but due to the time and filament consumed during test printing, 

I reduced it to 25 cm. This size still looks quite good.

After printing, it's much easier to assemble if you store the parts separately—such as the torso, arms, and legs.

I printed it successfully using the X1C and P1S with a 0.4 mm nozzle, 0.2 mm layer height, PLA, and a Bambu SuperTack plate.

Most of the parts are large, so printing should be fine. 

However, if you encounter issues with some of the smaller parts, try adding a brim and printing them separately.
I’m sorry I can’t tailor everything to suit every user’s setup.

All parts are identical on the left and right, except for the feet.