Print Profile(2)
Bill of Materials
- Gartenschlauch Verschraubung x 1:
- Maurerschnurr x 1: Auskuppelhilfe
Description
This is a tip (lost tip) to flush a well pipe/filter pipe/slotted pipe into sandy ground with it
A flushed filter/filter pipe can be used to irrigate the garden or lower the groundwater level
I tested flushing an approximately 2m long slotted pipe with a conventional domestic water pump that provides an operating pressure of about 1 bar when water is drawn with a ½" hose, it works best with >2.5 bar
Via the decoupling aid, the garden hose can be 'decoupled' from above after the desired depth has been reached
I attached the flushing tip at the bottom end of the KG pipe with 2-4 small wood ("Spack-") screws so that it does not fall off during handling
Further/more detailed information upon request
Important note:
My models, works, files, and images (especially in this post) may only be used for private purposes.
It is not permitted to share this post, parts of it, models, and files on other platforms.
The sale of my digital works as well as physical products is prohibited.
(see license on the right side)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)