Constant-force Angled Talon Magazine Constantforce Angled Talon Mags

The angled talon magazine, which uses a constant-force spring coil, was made based on the original file, with the main body Print in Place.

A total of 3 lengths were produced, capable of holding 6/9/13 rounds of 13mm×36mm~39mm foam soft darts respectively.

Uses a 0.1×5×600 clockwork spring as the power for the dart follower plate.

The bottom cover requires a small amount of 502 glue or other medium-to-low strength glue for fixation, or use double-sided tape, etc., just to prevent it from falling off. If using high-strength glue, an ungluing agent should be prepared to facilitate disassembly and maintenance if internal issues arise during use.