Jointless Bag Clips / Bag sealers

Bag clips in 3 different sizes, jointless, allowing you to keep your food in the best conditions.

Just fold the top part of the bag to be sealed in half, then insert the clip from one side and slide it all the way across.

3 sizes available :

• Bag sealer 200mm (1mm spacing) : for small and medium bags, such as pet food / snack bags…
• Bag sealer 280mm (1mm spacing) : for large bags, such as chip bags…
• Bag sealer 280mm Large (2mm spacing) : for thicker bags, such as pet kibble bags, cardboard bags...

Dimensions :

• Bag sealer 200mm : L:200 x W:20 x H:16 mm
• Bag sealer 280mm : L:280 x W:20 x H:16 mm
• Bag sealer 280mm Large : L:280 x W:28.5 x H:23.5 mm

All 3 models can be printed on a 22cm x 22cm build plate (place the 280mm models diagonally).

Printing tested on Creality Ender-3 V3 KE

-------------------------------------------------------------

For 3D printing in PLA or PETG.
Flat printing, NO supports, NO brim

Indicative printing times on Ender-3 V3 KE :

• Bag sealer 200mm : 35 min, at 100 mm/s  (1st layer at 25mm/s)  / filament : 6.70 m / 20 g
• Bag sealer 280mm : 48 min, at 100 mm/s  (1st layer at 25mm/s)  / filament : 9.30 m / 28 g
• Bag sealer 280mm Large : 1h15 min, at 100 mm/s  (1st layer at 25mm/s)  / filament : 15.90 m / 47 g