Rotary Fidget (Do Nothing Fidget)
Print Profile(4)
Description
This fidget will keep your hands busy and your brain satisfied for hours. It is very easy to assemble and is fully 3D printed. All print profiles are assembled in the same way.
Printing Instructions:
Make sure you have a clean plate for optimal bed adhesion.
- Print the model in your favorite colors (If you have an A1 mini you can use the print profile “Separate Plates” or “Mini Version” and if you don't have an AMS you can print the “Separate Plates” profile).
Assembly:
Remove the brim from the four pistons and loosen the knob by rotating it (this may require force).
Snap on the first piston to the handle.
Slide the piston into the base of the fidget.
Attach the second piston to the handle by first sliding it into the base and then snapping it to the handle. Make sure you attach it to the correct hole on the handle.
Repeat for the 3rd piston.
For the final piston you will need to be extra careful.
Congratulations! You finished putting together your own Rotary Fidget. The first few times it may be a little stiff but it will soon loosen up.
Boost Me (for free)
If you enjoyed this model then please leave a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (38)