Xiegu X6100 Gridfinity 3x5 12U Ham Radio Go Box

Having been printing Gridfinity for my HAM kit storage, I needed a go box for JOTA coming up in October. After lots of searching, I could not find a Go Box case or anything for the Xiegu X6100, so I made one. It's a simple 12U 3x5 modified to snugly fit the X6100 in a 12U Gridfinity box. It does this very nicely.

3mf will show ABS, as that's all I had to hand, then found some old PLA, so printed with that too. Very slight corner lifting problem with both, the ABS lifted a small amount in the corners, but does not affect the fitment inside the Gridfinity box. Some bed weld would help the textured plate if you print with ABS. The PLA also lifted but a very small amount using the super tack cool plate, feel free to experiment.

Also attached are the STL and SKP sketchup files if you want to modify or fiddle with the design. 

Hope someone finds my first every post useful!

73's 2EOFXE