Giraffe Tools 4000psi Hose Reel Quick Swap Mount

QUICK AND EASY WALL MOUNT!! Universal Mount added as well, see below.

The Giraffe Tools pressure hose reel has a hard mount only option. Most garden hose reels have a swivel pin that you can pull and quickly disconnect the entire assembly which is nice for storage and possibly moving to a 2nd location with ease. I wanted to design a wall mount that would hold the weight of this reel and also allow me to quickly and easily detach the reel for storage and to move to various locations for easy operation. This is my solution. I used 7 walls with 30% triangle infill. Printed in PETG for durability and heat resistance. I do not have the ability to print in anything stronger so that's my best option at this time. 

I used the lag bolts that were included with the hose reel but really any anchors will work if you supply the right size washer. You might need to cut any excess bolt length off depending on what you end up using. Same thing for the backing plate that attaches to the hose reel. I will be uploading a blank set with no mounting holes so you can easily adapt for whatever use you can think of.

I've uploaded a blank mount option as well. Check the print profiles and you'll find a single plate and 2 plate print profile that will allow you to add your own holes in your slicer. This allows you to use this wall mount for anything you have in mind.