Sheet Pile Wall

The model represents a sheet pile wall, typical in harbors as a quay wall. It is modeled after common sheet pile walls at a scale of 1:14 / 1:16. The sheet pile wall is intended to be the quay wall for my cutter and other ships of similar size for my garden pond. The sheet pile wall consists of individual elements that need to be assembled. I spent a long time tinkering, also considering filament shrinkage, to design a usable profile. The profile is 150 mm long, 51 mm wide, and 12.5 mm high. One profile of this size will require approximately 24 g of filament. Definitely perform test prints of scaled lengths and check if they can be joined together. The profiles can be slid into each other if the tolerances are correct.