Tool Organizer Side Caddy - X1C P1S H2D H2S

This is a side mounted tool holder for the side of the X1C, P1S, H2D or H2S printers. It consist of two main print plates, one for the main body, and a second plate for the accent colored inserts. I have tried to make it very modular so others can make custom inserts based on their own needs. I have included a Step file for modification in your CAD package of choice, and I have included a link to the native Onshape file below for modification there using the original design tree.

Onshape Link: https://cad.onshape.com/documents/44e66712d78ab03adc2136f2/w/191886c00274f0b3332d2f26/e/0dd23f99589d6c0027d31e6c?renderMode=0&uiState=68d1798c2a3ff8e307e7640e

Please note the fit on the inserts is intended to be tight. They are designed to press in and not require glue. As such you may need to press them in with a hard surface like against a flat table. They should be sturdy if you use good quality filament, so don't be affraid when pressing them in, just keep pushing :)

To hold the tool holder on the side of the machine firmly you can add VHB, but I have found Blu-Tak works just as well and is easier to pull off if you decide to move/remove it later. 

The base mount has a few options for the glue on lip (super glue). That top lip was made modular so you can use it to bear the vertical weight of the caddy on the top of the printer, and I have included a dovetail version meant to work with the awesome V5 Glass Slider Riser design by @Sanja3D.