Mini Arcade Riser 1/6 to 1/4 scale height convert

If you have any of the 1/4 scale Numskull arcade machines, as well as some of the also very nice 1/6 scale arcade machines from Replicade this could be useful. Being a child of the era when arcades were common, machines were often different sizes, but crucially not the height.  

So to make these display nicely beside each other, I took a leaf out of the 1-up world and designed a riser to bring them to the same height for buttons/joystick. I made the sides print seperately as I wanted the build plate texture on all 3 visible faces, and to print the sides in colour to match my arcade unit in the most efficient way. 

Base design involved calipers and Tinkercad, using the Bambu Studio to then shave off 2mm side panels and add connectors for quick assembly. I did need a tiny tweak on the rubber feet to get the super tight fit I wanted between base and model, using a sharp knife but this overall is working great so sharing in case anyone else has a similar problem.