3/4" Workbench Dog Hole Template
Print Profile(1)
Description
¾" Workbench Dog Hole template
This router jig is used to add holes to your workbench dog holes. To use clamp to workbench using the clamp offsets, this will give you enough room to use a 6" plunge router.
- Dog holes are spaced 3" from center apart
- Alignment pins set proper distance from workbench edge
I would recommend not using the corners as the majority of the router base will not be over the template and it may be unstable.
The holes may be shallow depending on the height of your bushing and length of your bit, I would recommend using a Woodowl Overdrive drill bit for this.
Tools required
- Plunge router
- ½" bushing
- ¼" spiral up cut bit
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)