Freezable can cooler 330ml up to 8 hours cold
Print Profile(1)
Description
Keep your drinks colder for longer with this freezable 330ml can cooler. Designed with a refillable water chamber, you can freeze it ahead of time and enjoy chilled beverages wherever you go.
Assembly & Parts Needed
- M3 threaded insert
- M3 bolt
- (Optional) O-ring for the bolt to help prevent leaks
- (Optional) Syringe or needle-tip bottle for easier filling
Filling Instructions
When filling the chamber with water, make sure to leave about 10% empty space to allow for expansion as the water freezes.
- You can either measure and remove ~10% of the volume before sealing, or
- Use a flashlight to gauge the fill level from inside the model.
- Overfilling may crack the container, so this step is essential.
Test Results
The model was printed in ASA and tested at an ambient temperature of around 30°C. A chart is included showing beverage temperature measured at 5-minute intervals.
- Cooler left in open air on a desk
- Cooler carried in a standard backpack placed on the ground
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)