Hatsune Miku 200x200

**** Update 27 Feb 26****

I have remade the profile and print as this was one of my first HF's and I've learned a few tricks since.  

Project: Update.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.4mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3
    #00b1b7 PLA BambuLab Basic Turquoise  Transmission Distance: 1.4
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions for newest v2 variant (If not using the modified 3mf which has it's modified layer heights):
    Start with PolyLite Black
    At layer 8 (1.12mm) swap to BambuLab Basic Blue Gray
    At layer 13 (1.52mm) swap to BambuLab Basic Turquoise
    At layer 18 (1.92mm) swap to BambuLab Basic Jade White for the rest.

**********************************************************************************************************************

I got asked if I could make a Miku inspired hueforge for a clients kids so I tried my luck. AI was used to help generate some the background as I'm still learning how to make them.