First Aid Responder sign

My workplace needed a way to easily identify those of use who have first aid training, so I whipped this up using the Makerlab sign maker system.  As listed it is 150mm long and 3mm thick, and prints fine with a .4 nozzle.  I slowed down the top layers a bit.  It can be shrunk to 100mm long without losing much in the way of detail, but you may want to go to a .2 nozzle if you can.  The photos are with the .4 nozzle and a 1500 mm/s^2 top surface speed.

To do a multicolor print you need an AMS.  Otherwise you could do all in white and then use permanent red and black markers to add detail on the raised sections.

Print time: 52 minutes on an X1C with AMS.

24g white, 2g black, just over 2g red.