Search models, users, collections, and posts
Print Profile(3)
w/ 65mm MagSafe cutout - hexagon - 0.2mm, 4walls, 12% infill
13.7 h
8 plates
0.2mm layer, 2 walls, 15% infill
36 h
13 plates
Better overhangs/bridges. 0.15mm layer, 1 walls, 25% infill
30.3 h
13 plates
Open in Bambu Studio
Boost
108
297
81
34
951
544
Released
Description
These cases are meant to be printed using flexible filament (eg. TPU 95A - 98A).
My personal preference is to turn off top and bottom layers and use a 12% honeycomb infill, see screenshot.
8-30-2025 - Added optional kickstand versions
8-31-2025 - Added “slimfit” versions, where back wall thickness equals sidewall thickness. Camera bar protrudes unprotected, so be wary of that.
9-13-2025 - Added standard vs. rugged versions. Standard versions have 1.5mm sidewalls, Rugged has 2.0mm sidewalls.
9-13-2025 - Added optional grip textured sidewalls. Be sure your printer is well-tuned for this one.
Comment & Rating (81)