Tarot Bookmarks - (Set 5 Major Arcana)

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

Major Arcana Tarot Bookmarks – Set V ✨🌀

Set V arrives with three powerful archetypes: The Hanged Man, Death, and Temperance—each crafted in the same detailed, mystical style and edited to highlight their core symbolism and mood.

What’s inside this set

• 🪢 The Hanged Man

  

• 💀 Death

  

• 🍷 Temperance

  

Printing tips

• For the best results, print these with a 0.2mm nozzle and use my custom profiles. 🖨️
• The bookmarks are small and packed with detail—using a 0.4mm nozzle will lose a lot of the fine lines and textures. 🔍

Each card in this trio marks a turning point—shift perspective, release what’s outgrown, and move forward in balance—which is exactly the journey this set is designed to evoke on the page.

The pictures show a model printed with a 0.2 nozzle using my profile
The design allows for printing with simple color changes at layer, which saves a lot of filament!

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Jayo Silk Red Copper Transmission Distance: 1.1 / Amazon
PLA KINGROON Black Transmission Distance: 0.4 / Amazon
PLA+ Jayo WHITE Transmission Distance: 7.2 / Amazon

Color Pallete:

Swap Instructions:
Start with Silk Copper
    At layer #4 (0.41mm) swap to Black
    At layer #10 (0.89mm) swap to Silk Copper
    At layer #15 (1.29mm) swap to WHITE for the rest.