Hueforge Venom Marvel Spiderman Simbionte Comics
Print Profile(1)
Description
Instagram: CanariasPrinter3D
Print with 100% infill and a layer height of 0.08 mm with a 0.16 mm base layer
The model is 200x200 mm in size, but you can scale it to any size as long as you do not modify the Z height
You can print at higher layer heights below the Minimum Depth of 0.48 mm
The Maximum Depth is 2.2 mm and the Actual Depth is 2.2 mm
Boost Me (for free)
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Basic Gray Transmission Distance: 5
PLA BambuLab Basic Jade White Transmission Distance: 8
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.88mm) swap to Gray
At layer #21 (1.6mm) swap to Jade White for the rest.
Boost Me (for free)
Thank you for your support!
🔧 Printing Tips
Before printing, please clean your printer's bed for better results. I recommend using a 3D printing stick or spray for firm and secure adhesion. This will prevent adhesion problems and ensure a better finish from the first layer.
📸 Share Your Result
Each printer and every setting can greatly change the final finish. How did your figure turn out? I would love to see it. Upload it and share your photos with the community so we can all continue to grow!
ENJOY!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)