3D Filament Sample Card (Color Swatch) & Stand

This is a 3D filament card designed to provide an accurate representation of your filaments when printed. I've tried the flat ones and was not satisfied. They were not giving me a good enough idea on how the filament would look when printed.

This one shows side & top surfaces, curves, overhangs, points, and transparency (the lines at the bottom are 0.2, 0.4, 0.6, 0.8, 1.0, and 1.2mm deep). It's still easy to print and store. Takes about 30 minutes to print, uses about 10 grams of filament.

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

→ Model link on Onshape ←

These are the versions available:

1. For 50 × 30mm labels (2mm radius corners)
2. For 40 × 30mm labels (2mm radius corners)
3. For 2.25" × 1" labels (2mm radius corners) - Check the profile named “All Sizes”
4. For 50 × 15mm labels (2mm radius corners) - Check the profile named “All Sizes”

I'm using NIIMBOT B1 printer personally, with 50 × 30mm labels. Here is the Amazon USA link: Link to NIIMBOT B1. All card styles have their own stands. There are slots for 12mm diameter non-slip feet at the bottom of the stand (anything smaller would also work). If you don't have a label printer, you can also use the “Text" function in Bambu Studio to add the text physically on the model.

If you have a label printer that uses a different label, let me know and I'll upload profiles for that as well.

Check out my other accessories:

A1 Maintenance Tools & Box (Lubing & PTFE Tube)

Clamshell Box - 20+ Variants - 33gr Filament

Bambu Bed Scraper & Stand

Tweezer Set & Mangetic Case (4 Different Tweezers)

Modern Japandi Trays (Perfect for Tea Bags)

Auto-Locking Towel Hanger (Gravity Wall Hanger)