Servo Frame 20MM

Servo frame designed for standard servos.
For the bottom surface, I recommend the Textured PEI printing plate, so you already have a good rough surface for gluing on the underside.
I designed the model to fit M3 heat-set inserts.

ATTENTION!!!
Not every servo is exactly the same size. If a standard servo doesn't fit, it's possible that the manufacturer deviates slightly from the dimensions.

For stronger servos, I explicitly recommend using ASA, ABS, or CF Infused filament.

If your servo does not fit, please provide feedback so I can adjust the model or create a new one.