Tarot card Major Arcana Hand-drawn Tarot
Print Profile(2)
Description
Boost Me (for free)
Thank you for boosting me to help me get more filament!
As a hidden part-time tarot reader, how could I not have my own set of tarot cards? This hand-drawn tarot set was designed based on this idea.
This model is easy to print, requiring only color changes at the bottom and top layers. It is recommended to print with a 0.2 nozzle. A 0.4 nozzle can also be used, but you need to enable A wall (the parameters are already set in the profile, if you don't adjust them, you can directly use my profile). If you encounter any problems during printing, you can comment and let me know, and I will reply when I see it.
Note 1: Be sure to clean the build plate before printing and ensure its surface is flat.
Note 2: Flow rate calibration can greatly improve print quality, a manual calibration can be performed before printing.
Note 3: The surface in contact with the build plate will have a better appearance, by default I place the card face down.
Note 4: When printing, please pay attention to the filament order, prioritize printing colors with more parts, for example, my default profile has set white to be printed first, and then black. This can increase the adhesion of the model and prevent defects caused by detachment.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)