Easy Print Airless Tennis Ball TPU!!!!
Print Profile(1)
Description
Imagine a fascinating airless tennis ball printed entirely from filament, built around a flexible honeycomb or hex-mesh shell that bounces almost like the real deal—no inflation needed, no punctures, no leaks. Many printable versions like Airless Tennis Ball V2 and the well-tested v1.1 or GEN 2 models rely on that open structured lattice geometry to absorb and release energy. TPU 95 A or TPU 98 A (or PLA-Flex) are recommended for maximum bounce and impact resistance, with TPU-98 A models achieving around 50 % of standard drop-bounce height, while TPU-95 A gives slightly less but resists cracks better—PLA/PLA-Plus prints can work as display models but are brittle for play. Recommended print settings for durability are around 0.16–0.20 mm layer height, minimal infill, usually about 2 walls or shells, and supports only under the base to avoid obstructing the interior mesh.
AI Generated please dont take its word for it!!!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (52)