Search models, users, collections, and posts
Print Profile(1)
0.2mm layer, 6 walls, 15% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
4
6
0
0
2
0
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- ruthex Gewindeeinsatz M4 x 9: https://www.amazon.de/dp/B07YSV66Y5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Description
Content has been automatically translated.
Boost Me (for free)
If you like the design, I would appreciate a boost.
I took the tentacles and made the following adjustments:
- Holes were placed for M4 threaded screw inserts as used for furniture handles
- The holes are 9mm deep and fit standard inserts with an 8.1mm length
- Adjusted thickness so that they are stable enough for furniture handles
- Support enabled
I used ruthex M4 threaded inserts as threaded screws. These can be easily inserted with a soldering iron.
For the right tentacle feeling, I used Magenta PLA, but everyone can unleash their creativity there.
Some tentacles can be printed without support, while others will be more difficult. You can play around and try it out.
___________________________________
You have questions, suggestions or other remarks and do not want to leave them as a comment.
I am also happy to answer questions directly - just write to me via my profile.
Collections:
___________________________________
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)