Panduit Mini-Com 2-port Decora wall plate CFG2

Summary

This is a loose reproduction of Panduit CFG2 which mounts 2 Mini-Com modules into a Decora-style wallplate. Probably best to print with the front/face down on the buildplate and use supports. Must use a somewhat flexible filament like PLA-Pro or PETG etc... plain PLA is too brittle and the tab will probably just break off.

edit--- I uploaded a version2 where I created a pocket around the tab in order to give it a little more length to flex, and I also set the tab back away from the edge of the socket so it does not have to bend as far when the jack is inserted. These changes should make the tab less likely to break off.