D&D/Chibi Warrior with Axe
Print Profile(1)
Description
Warrior for D&D
Removing the support from this figure is not easy and requires patience. Tools such as side cutters and needle-nose pliers are very advantageous.
Dimensions: X= 32mm Y= 32mm Z= 50mm
Difficulty: Hard
Support: It's always best to cut the supports first before removing the rest from the figure. For the fingers (without the axe), carefully try to loosen the support so it almost comes off by itself, as the fingers could easily break.
For the axe, also try to loosen as much as possible, then you can carefully pull the support downwards, but be careful not to break off the blade.
For the support on the base, especially at the back of the cape, it's best to cut it first, then carefully grip and pull it out. Don't forget to also remove the one support on the base under the figure.
Have fun
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)