Camper van roller blind
Print Profile(1)
Description
I bought myself a camper, and several of these blind fasteners were broken.. i looked them up and found out they cost nearly 20usd / 17 Euro / 120 Danish Kroner for a 1 new one, and i had 8 that were broken... So i decided to take one of the surviving ones, and draw it myself in AutoCad. It took a while but worked like a charm.. Print it upright for best result..
I bought a camper van where several of these clasps for the roller blinds were broken. I looked online and found that they cost almost 20 USD / 17 Euro / 120 Danish Kroner for 1 new one. and I had 8 that were broken.. So I decided to take one of the ones that had survived, and draw it myself in AutoCad. It took a while, but it worked exactly as intended.. Print it upright for best results..
I bought a camper, and several of these blind rivets were broken. I looked them up and found out that a new blind rivet costs almost 20 USD / 17 Euro / 120 Danish Kroner, and I had 8 that were broken... So I decided to take one of the working blind rivets and draw it myself in AutoCAD. It took a while, but it worked wonderfully. It's best to print them upright.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)