Filaments Used:
	#080a0d PLA PolyLite Black  Transmission Distance: 0.3
	#2b2fd0 PLA Anycubic Dazzling Blue  Transmission Distance: 4
	#8c9099 PLA PolyLite Grey  Transmission Distance: 1
	#e2dedb PLA PolyLite White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
	Start with Black
	At layer #8 (0.72mm) swap to Dazzling Blue
	At layer #13 (1.12mm) swap to Grey
	At layer #20 (1.68mm) swap to White for the rest.


q_william

I used luminous filament in place of the white so the ghosts glows in the dark

tjaymz

0.08mm layer, 2 walls, 15% infill

EngineerDad66

cover

plate_1.png

2025-09-15_88dce429cd4d.jpg

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 198.55x112mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used:     #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6     #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3     #9b9ea0 PLA BambuLab Matte Ash Gray  Transmission Distance: 1.5     #fff8f7 PLA AMOLEN Glow in The Dark White  Transmission Distance: 4 This print uses 4 unique filamentsSwap Instructions:     Start with Black     At layer #8 (0.72mm) swap to Blue Gray     At layer #14 (1.2mm) swap to Ash Gray     At layer #18 (1.52mm) swap to Glow in The Dark White for the rest.

Haunted Mansion Hitchhiking Ghost

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models

Haunted-Mansion-Hitchhiking-Ghosts_Front_199x112

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models