PS4 DualShock Joystick HOTAS / HOSAS

A snap-on HOTAS adapter for your PlayStation DualShock controller.

The models are divided into plates so you can directly print what you need.

You will need to first print the “Controller mount” plate:
 

From that you print the plate with the attachment that you want. 

Per example for a throttle on the left hand and a Joystick with trigger on the right han you will print this two plates:

(Note that the Left-Hand models are colored blue and the right hand models are colored red)

You can choose from the following couplings:

• Throttle
• Joystick
• Joystick with Trigger

If you find this useful, consider leaving a boost

NOTE: The trigger joystick requires a cable (preferably nylon or similar) routed from the trigger, through the joystick recess, through the joystick shaft and to the lever located where the controller trigger is.

Model created by akaki under CC BY-NC-ND license.

I couldn't the files on MakerWorld so I created a project and configured the print profiles to better suit the models.