Magnetized low profile right angle screwdriver

This is a remix of the brilliant right handle screwdriver made by LocalOutlier. My addition is the embedding of a round 4x2mm magnet under the bit to keep it in securely and be able to use this handle with smaller bits. This is indeed the use case that prompted this remix

Printing instructions 

I used the same printing profile as the author but with an added pause after around 14 minutes (also taking into consideration bed leveling) to allow you to insert the magnet. Once you embedded the magnet there is no way to get it back save from destroying the handle.

Using other magnet sizes

My original remix (as per the BOM) allows you to insert a 4x2mm (DxH) round magnet. This is parametric and i have attached the Fusion file so you can edit this to use other magnets. Otherwise just leave a comment with the magnet size you need and i will upload a printing profile with the correct measurement. If you adapted the model to use a different size magnet i encourage you to share the printing profile so that others may use it.